Basic Info.
Type
Self-Starting Diesel Generator
Installation Method
Fixed
Cooling Method
Air Cooled
Output Type
AC Three Phase
Conditions of Use
Land Use
Landuse Type of Unit
Ordinary
Excitation Mode
AC Rotating Exciter
Engine Model
Googol Qta2160-G1
Alternator
Stamford, Marathon, Leroy Somer, Mvc, Engga, etc.
Controller
Harsen, Deep Sea, Datakom, etc.
Engine
ISO9001, GB/T2820-97, ISO8528
Alternator Standard
Bs5000, VDE0530, NEMA Mg1-32, IEC34, IEC60034, As1
Optional Parts
Water & Oil Heater, Oil-Water Separator, Air Break
Optional
Soundproof / Waterproof Canopy, ATS, Parallel Syst
Warranty Period
1 Year or 1000 Hours Running, Which Is Coming Firs
Transport Package
Poly Plastic Foam or Wooden Case
Product Description
1000kVA Water Cooling Generator Set with Heat ExchangerPerformance Feature
Engine and alternator shall be mounted on a same frame steel skid.
Built-in damper for anti-vibration.
Small size, low weight, easy for operation, installation and maintenance.
World most famous brand diesel engine.
Volvo PENTA, DOOSAN, DEUTZ, LOVOL, WUXI POWER, GOOGOL, CSR.
World famous brand AC alternator: Stamford, Marathon, Leroy Somer, MVC.
Advanced and reliable controller: Key start, Auto start, AMF & Remote control by PC with RS232 / 485.
Full range protect function and alarm shutdown feature.
Comply with GB/T2820-97, ISO8528 national standard and ISO9001 quality standard.
Alternator Feature
Brushless, 4 poles, rotation magnet.
IP21-23 enclosure is standard for all industrial alternators.
The insulation system is Class H.
Simple installation and maintenance, with easy access to terminals, rotating diodes and coupling bolts.
Wide range of flange adaptors and single bearing disc coupling.
Standard 2/3 pitch windings avoid excessive neutral currents.
Optional accessories available for easy paralleling with mains or other generators.
Optional permanent magnet generator ( PMG ) system provide constant excitation under all condition.
AVR auto voltage regulator, auto exciter, auto adjustment.
Standard: BS5000, VDE0530, NEMA MG1-32, IEC34, IEC60034, AS1359.
Control System
GCS6410 is an Automatic Mains Failure module which is designed to monitor the mains utility and on failure automatically starts the generator and transfers the load. On return of the mains utility the controller automatically returns the load to the mains and stops the generator after a cool down period.
The module also monitors and protects the engine, indicating operational status, fault conditions and metering on the front panel LCD or LED's.
Ture RMS measuring
Configuration of parameters by front panel push buttons or communication software
RS485, RS232, or USB port for remote communication.
Configurable fuel output energise to stop or energise to run.
6 configurable inputs.
3 configurable outputs.
2 analogue inputs configurable for different senders for oil pressure and engine temperature.
With ATS control.
Standard Accessory
Common steel base frame, Damper, Exhaust silencer, Flexible pipe, Battery connecting wires, Operation manual and document.
Optional Accessory
Circuit breaker, Starting battery, Engine coolant and oil heater, Alternator space heater, Cooling for heat exchanger, Control system with RS232/485 communication interface, Battery charger by main supply. Fuel-water separator, Daily fuel tank, ATS & parallelin system, Soundproof canopy and Moving trailer.
Quality Warranty Period
All equipment is guaranteed for a period of 1000 hours running or 12 months from the date when the generator set has been delivered from the factory.
Integrated Power Solutions
Emergency rescue system solutions for mobile power.
Uninterrupted backup power system solutions for villa.
Complex commercial real estate solutions for backup power systems.
Power and pneumatic Integration solutions for mining.
Precision manufacturing and industrial enterprise backup power systems solutions.
Pulp and paper plant backup power systems solutions.
Star hotel and high-level office backup power solutions.
Large data memory center and high-speed generator sets power systems solutions.
Automatic high-speed Integration parallel and the power grid system solutions.
Chongqing Googol will be emphasis on producing big horsepower engine with the developing direction on environmental type and save energy type. We will lead the developing and keep advantage in engine filed in China, and also we will follow the top level with the world technique. Our products will be mainly used for power generator set, construction, marine ship, kinds of industry usage.
Googol Engine Feature
All Engines will be 4 cycle stroke, P780 series is 6 cylinder in line P890/1120/1340/1780 series will be V-type 8/10/12/16 cylinder, Q2160/3240/4320/5400 series will be V-type 8/12/16/20 cylinder Turbocharged and water-air / air-air intercooler technology Smaller size, lower weight
1, Cylinder Block
High quality alloy cast iron for rigidity performance and good stability with the feature for reducing engine working vibration and noise. Wet cylinder liner with good cooling effect and work performance, more easy to replaced.
2. Crankshaft- Steel
Robust and fully balanced crankshaft design by integral forging for a more steadily and higher strength and longer working life. The main bearing is produced by world leading quaternary spray coating process with long life and reliability.
3. Connect rod
Connect rod is made by advantage up broken type process with higher precision. It will lead to longer life for connect rod and bearing by increase the withstand impact. Steel piston is casting with aluminum alloy for better durability and boost engine output.
4. Cylinder Head and Valve
2 valves for P series and 4 valves for Q series per cylinder, Optimize the mixed air/fuel level which lead to an excellent fuel consumption rate and emission performance. High quality alloy cast iron for the cylinder head, one cylinder with one head, easy for maintenance and service.
5. Camshaft
Single camshaft for PV series engine and installed in the middle position of engine which lead to small size and low maintenance cost.
6. Intake & Exhaust System
Advanced turbocharger and water-to -air or air-to-air after cooler technology, ensure enough intake air and decrease the temperature, provide excellent emission performance. Pulse exhaust manifold increase the efficiency when engine run at lower load condition, and lead to excellent fuel consumption rate.
7. Fuel System
High pressure injection system make the fuel injector open pressure above 280bar, which lead to an excellent fuel consumption. Check valve in fuel lines improve reliability.
8. Lubrication System
Gear oil pump will supply the lubrication oil to all bearings, and cooling the piston inner through the cooling jet.
9. Cooling System
Great flux water pump provide effective cooling. Two water pump design for Q series engine, improve the performance at high load condition, and provide excellent emission performance.
10. Electrical System
24V DC starting motor and 45A battery charging system |
Generator set | Genset Model | HGM1110 | Rating Power (kW/kVA) | 800/1000 | Standby Power(kW/kVA) | 888/1110 | System Voltage | 400/230 | Rating Ammeter(A) | 1443 | Diesel engine | General data | Engine model | QTA2160-G1 | Prime Power(kW) | 889 | Standby Power(kW) | 983 | number of Cylinder & Configuration | 8 cylinders V-type | Bore X Stroke (mm) | 170X195 | Displacement(l) | 35.4 | Compression Ratio | 13.5: 1 | Governor type | Electronic governor | Rated speed(rpm) | 1500 | Exhaust system | Exhaust gas flow(m³ /min) | 241 | Exhaust gas temperature (º C) | 435 | Max. exhaust back pressure(kPa) | 10 | Air intake system | Aspiration Type | Turbocharged & After cooled | Max. intake depression(mbar) | 6 | Combustion air Volume(m³ /min) | 88 | Fuel system | Rating Fuel Consumption(l/h) | 202 | 75% full Fuel Consumption(l/h) | 152 | Lubrication system | Total oil capacity(l) | 140 | Max permissible oil temp (º C) | 100 | Oil pressure at rated rpm(KPA) | 300-450 | Cooling system | Total Coolant capacity(l) | 160 | Max. temperature of coolant (º C) | 89 | Fan cooling air flow(m³ /min) | 1900 | Alternator | Alternator model | MGA400-800-4S | Rating Voltage(V) | 400/230 | Rating Capacity(KW/KVA) | 800/1000 | Eff. % | 95.1% | Power Factor | 0.8 | Exciting type | Brushless self-exciter AVR | Voltage regulation | ± 1% | No. of Phase | 3 phase 4 wire | Enclosure Class | IP121 | Class of Insulation | H | Battery | Rating Capacity(AH) | 2X200AH 12V | Dimension | Generator set dimension (LXWXH) | 4600x2190x2288 | Weight | Generator set Net Weight (kg) | 7800 |
|
For more products, please visit our showroom honnydg.en.made-in-china.com
For more details, please visit our website honnydg.en.made-in-china.com
Address:
No. 2 Industry North Road, North Industrial Park, Songshan Lake, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory, Other
Business Range:
Agriculture & Food, Auto, Motorcycle Parts & Accessories, Construction & Decoration, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Light Industry & Daily Use, Metallurgy, Mineral & Energy, Service, Transportation
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, SA 8000
Company Introduction:
Guangdong Honny Power-Tech Co., Ltd was founded in 1992 and has been one of the leading OEM manufacturer and supplier of power generator and Power Plant within the range of 16kW to 50MW. Honny Power incorporation of Googol Engine-Tech., Ltd. Is committed to provide efficient cost effective clean energy power solution.
We Honny Power specialized in assembly, design, sales, installation and maintenance of diesel generators, natural gas generators, biogas generators, biomass generators, dual fuel generators, diesel power plant and gas power plant. Diesel engines and Gas engines with high and middle speed. Sound and weather proof canopy, Special container, Trailer type power generator, Transformer substation, synchronization and ATS Panels are in related products to provide one window solution for our customers. We have vast experience to design install and maintain power plants around the world with our best world class expertise and engineers. We establish international manufacturing standard, structure and highly qualified staff to maintain quality.
In order to meet rapidly growing demand of our power generators from local and international markets around the world, Honny set up 2 wholly-owned large-scale manufacturing factories, 2 R&D design centers. And there are sales and after-sales service centers in major cities in China.
Under 25 years of tireless work and painstaking efforts, Honny reelected for five consecutive years in China′s best power solutions integrator, and won the Guangdong high-tech enterprises, Guangdong Famous Brand, Guangdong Top Brand, Dongguan Top 50 private enterprises, Dongguan enterprise of observing contract and valuing credit, Dongguan patent nurturing enterprise, Dongguan private technology enterprises, the founder Wen Guosheng won the Dongguan inaugural honor outstanding private entrepreneurs.